How to reduce the temperature of computer

Share

Reduce the temperature of the computer!, It is important to keep the stability of your computer. Computer temperature is you must take, especially for those of you who use small computers with a working system.

Here we will say a few ways to reduce your computer temperatus.


1. Match clockspeed and voltage manually through the hardware
Do this only if you're comfortable configuring the BIOS and know how to reset the jumper on the motherboard. If you plan to seriously tamper with the system for minimum power consumption, you may have to reset several times before obtaining the optimal configuration. Very difficult to give any instructions on setting up to do. Each motherboard has different settings and may have the same options, but different results.

If you are serious about saving energy, you will need time to do research on a range of voltages, settings where the right individual to maintain stability while reducing power consumption.

2. Turn off your computer
How to number one of the most effective is when your computer off when not needed. Many people still leave their computers running 24 hours a day even when not in use. Indeed C & Q or SpeedStep can reduce energy usage, but still the energy that is used to increase over time.

3. Make sure if Intel SpeedStep or AMD Cool'N'Quiet Functioning
Both Intel and AMD have a microprocessor that enables the chip to significantly reduce the speed, power consumption, and heat. At first, these features are designed for mobile processors, but was integrated into the desktop and workstation processors as well.

4. Do not use CRT
It has a color CRT monitors and the response time the better. But in terms of savings CRT is a very bad idea. For example, the monitor Sony G400 19 "using the power of 140W and 15W when operating in an idle state while the LCD monitor Acer AL2216 22" is not only bigger, but it also uses only 40% of the energy required Sony, which is 55W when operating and 2W when idle.

5. Match clockspeed & voltage manually via software
If your system does not support SpeedStep or C & Q, or you want to adjust further settings, use the software or other programs. AMD offers OverDrive, NVIDIA has nTune, and Crystal CPUID is very useful to set the CPU multipliers (at least at K8 / Intel parts, but not for K10), and many motherboard makers that have their programs on their own, although the quality of software can varied.

POsted by d3tektro.forumotion.com
source: Arstechnica

Share

Related Post

Copyright 2011 Looking News - Template by Kautau Dot Com